Companies Represented

Alton Steel

Territory – Ohio, Michigan, West Virginia, Kentucky

SBQ

Diameters: 0.750″ to 3.9″
Length: 16′ to 60′

Grades

  • 1000 Series
  • 1100 Series
  • 1215
  • 1500 Series
  • 4000 Series
  • 4100 Series
  • 5100 Series
  • 8600 Series

Coil

Diameters: 0.750″ to 1.812″
Weight: Approximately 5,000 lbs (2,270 kg)

Grades

  • 1000 Series
  • 1100 Series
  • 1215
  • 1500 Series
  • 4000 Series
  • 4100 Series
  • 5100 Series
  • 8600 Series

MBQ

Diameters: 0.75″ to 3.5″
Length: 16′ to 60′

Grades

  • A36
  • A105
  • F1554
  • A615
  • A572

RCS

Diameters: 1.25″, 1.50″, 1.75″, 2.00″
Length: 16′ to 60′

Maruichi-Leavitt Pipe and Tube

Territory – Ohio, Kentucky, West Virginia

STRUCTURAL TUBING – Produced to ASTM A500 Grade B & C

Size Range:
Squares from 1″ x 1″ to 10″ x 10″
(and corresponding rectangles)
Wall Thickness from .083 to .500 Wall
Lengths from 20′ to 80′ *
Weld on Large Side

Finish:
HRB (Hot Rolled Black)
Saw Cut End Finish

A513 Mechanical Tubing – ASTM A513 Type 1 & Type 2

Size Range:
Squares from 1/2″ x 1/2″ to 2″ x 2″
(and corresponding rectangles)
Rounds from 0.375″ to 2.750″
Wall Thickness from .028 to .120 Wall
Lengths from 36″ to 30′ *
Weld on Large Side

Finish:
HRB (Hot Rolled Black)
HRP (Pickle & Oil)
CRC (Cold Rolled)
Punch Cut or Saw Cut End Finish

Value Added Services
Flash Controlling (to.010″) *
Weld on Short Side *
Band Saw Re-Cutting *
Custom Bundle Configurations *

Modern Tube

Territory – Ohio, Michigan, West Virginia, Indiana, Kentucky

Stainless Steel Tubing

Austenitic Stainless Steels

304/304L                     Standard Austenitic Grades

310/310S/310H         High Temperature Resistant Grades

316/316L/316H          Improved resistant to pitting corrosion in chloride environments

Ferritic & Duplex Stainless Steels

409       Automotive grade – weld stabilized

430       Resistant to mildly corrosive environments

2205     Standard duplex stainless steel – high resistance to pitting and stress corrosion

2207     Super duplex with very high resistance to pitting and stress corrosion    

Richardson Metals

Territory – Ohio, Michigan, West Virginia, Minnesota, Wisconsin, Illinois, Indiana

Aluminum Extrusion Products

Aluminum Alloys

6061 Aluminum
Good strength, machinability, weldablity & formability.

6063 Aluminum
Best combination of strength & extrudability for difficult shapes and thin walled hollows. High surface finish aspects.

Extrusion Forms

Hollow Shapes
Profiles
Rod/Bar
Rods

Semi-Hollow Shapes
Solids
Tubing

Fayette Custom Wire Products

Territory – Ohio, Michigan, West Virginia, Tennessee, Indiana, Alabama, Kentucky

Wire Products

Cold Rolled, Flat Wire, Special Shapes & Profiles

With our in-house capability to craft specialized dies and rolls, we can take your concept and turn it into reality. Our engineers will work with you to guarantee proper tooling is developed specifically for your order. State of the art equipment allows us to produce your order in a timely, efficient manner so you can keep your facility operating.

The items below are just a small sampling of what we can do.

Shapes & Sizes

  • Size Range:  width .22″ – 1.00″ thickness .062″ – .5″
  • Triangles: Up to ½”
  • Half Rounds: Up to ¾”
  • Trapezoids: Up to ½”
  • Hexagons: Up to ¾”
  • CBM Wire (twist): 0.148” – .500” Cut to length 8” min – 20’ max
  • Ovals & other custom shapes: Please inquire
  • Industrial quality, mechanically descaled round wire – .098″ – 1.00″

Tolerances

  • Flat Wire: ± 0.002” thickness, ± 0.005” width
  • CBM Wire: ± 1/16” under 4’. Inquire for tolerances over 4’

Grades

  • Plain Carbon (10xx, 11xx, 12xx, 15xx, 41xx, 521xx, inquire for all other grades)
  • Stainless Steel (Austenitic, Ferritic, Martensitic, inquire for all other alloys)
  • Aluminum – Normally stocked grades
  • Copper – Normally stocked grades

Edge Profiles, Flat Wire:

  • #1 – Inquire
  • #2 – Natural mill
  • #3 – Square edge
  • #4 – Round edge
  • #5 – Approx. square edge by rolling
  • #6 – Square edge by edge rolling

Tempers, Flat Wire:

  • #1 – Hard (90 Rb min)
  • #2 – Half Hard (Rb 70 min to Rb 85 max)
  • #3 – Quarter Hard (Rb 60 to Rb 75 max)
  • #4 – Skin Rolled (Rb 65 max)
  • #5 – Dead Soft (Rb 55 max)

Admiral Steel

Territory – Ohio, Michigan, West Virginia, Kentucky

Spring, Strip and Alloy Steels

COLD ROLLED PRODUCTS

CR HARD SHIM SAE/AISI 1008/1010

CR HARD SAE/AISI 1008/1010

CR HALF HARD SAE/AISI 1008/1010

CR QUARTER HARD SAE/AISI 1008/1010

CR SOFT SAE/AISI 1008/1010

CR DEAD SOFT SAE/AISI 1008/1010

CR SOFT SAE/AISI 1020

CR ANNEALED SAE/AISI 1050

CR ANNEALED SAE/AISI 1074/1075

SCALELESS BLUE TEMPERED 1074/1075

CR ANNEALED SAE/AISI 1095

BLUE TEMPERED & POLISHED 1095

CR ANNEALED SAE/AISI 4130 AIRCRAFT QUALITY ALLOY

CR ANNEALED SAE/AISI 6150 ALLOY

HOT ROLLED PRODUCTS

HR AS ROLLED SAE/AISI 1020

HR AS ROLLED SAE/AISI 1035

HR AS ROLLED SAE/AISI 1050

HR P&O ANNEALED SAE/AISI 1050

HR AS ROLLED SAE/AISI 1074/1075

HR P&O ANNEALED SAE/AISI 1074/1075

HR AS ROLLED SAE/AISI 1095

HR P&O ANNEALED SAE/AISI 1095

HR P&O ANNEALED SAE/AISI 4130 ALLOY

HR AS ROLLED 5160 ALLOY

HR P&O ANNEALED SAE/AISI 6150 ALLOY